Features of Silicones

      1. Excellent stability to temperature alteration
         Stability over a wide temperature range from -40 to 200 ^oC.
      2. Good weather resistance
         Prolonged outdoor usage, not easily age, harden, crack, and flake off.
      3. Good protection from mechanical shock and vibration.
         Cured silicones exhibit excellent elasticity, provide good protection from mechanical
         shock and vibration.
      4. Excellent dielectric properties
         The backbone of silicones contain inorganic silicon, provides excellent insulation;
         therefore, it is very suitable for applications of electronic products.

Applications of Silicones
      1. Adhering and sealing.
      2. Waterproof and insulation.
      3. Potting, encapsulating, and molding.
      4. Heat conductive.

Silicones

	P/N	Color	Mixing Rate	CPS	Features and Applications
1-part RTV	S-282	White	---	Paste	Fixing and adhesive bond for general electronic parts
	S-283	Black/ Grey/ Red	---	Paste	Fixing and adhesive bond for general electronic parts
	S-291	White	---	15,000	Neutral, sealing and fixing for general electronic parts
	S-292	White/ Grey	---	100,000	Neutral, high viscosity fixing for high-heel electronic parts
	S-293	Black	---	15,000	Neutral, UL94HB approved, sealing and fixing for electronic parts
	SR-314C	Clear	---	10,000	Neutral, high transparency, encapsulating for electronic circuit board
	SR-322	Clear/ Black/ White/ Red	---	1,000	Neutral, potting, sealing, and encapsulating for small area
	SR-505	Clear/ Black/ White	---	5,000	Neutral, potting, sealing, and encapsulating for small area
	SR-512	Clear/ Black/ White/ Red/ Grey	---	12,000	Neutral, sealing, adhering, and encapsulating for low viscosity required area
	SR-535	Clear/ Black/ White/ Red/ Grey	---	35,000	Neutral, sealing and adhering for mid-high viscosity required area
	SR-550	Clear/ Black/ White	---	55,000	Neutral, sealing and adhering for high viscosity required area
2-part RTV	SC-129	Grey	1:1		Shore A 55, potting for high and low temperature resistant electrical and electronic devices
	SC-412	Clear	20:1	100	Highly transparent, light transmission > 96%, potting for transparency required devices
	SC-711	Clear	1:1	300	light transmission > 94%, potting for transparency required devices
	SC-725	Clear	1:1		soft elastomer, protection for tenuous lines
	SCN-320	White	20:1	2,000	Shore A 20, low viscosity, for ink transfer mass
	SX-326	Cream white	20:1	30,000	Shore A 65, moldmaking for high temperature (250 oC) use
Heat Sink	SG-226	White	---	Paste	thermal conductivity: 0.6W/mK
	SG-230	White	---	Paste	thermal conductivity: 1.0W/mK